0308-2 Lumberg Series 03 | Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP68

SWUM™ flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting


Technical Data

Environmental conditions

Temperature range: -40 °C/+85 °C

Materials

Insulating body: PA, V-2 according to UL94

Contact bush: CuZn, silver-plated and flash gold-plated

Housing: Zn diecast, pre-copper and nickel-plated

Seal: CR (flat), EPDM (O-ring)

Mechanical data

Insertion force/contact: ≤ 5.0 N  *1

Withdrawal force/contact: ≥ 1.2 N  *2

Protection class: IP68/67  *3

1) measured with a polished steel pin, nominal thickness 1.5 mm

2) measured with a polished steel pin, nominal thickness 1.5 mm

3) according to IEC 60529/DIN EN 60529
IP68: sealed in locked position; pair of appropriate connectors in locked position is sealed against ingress of dust and moisture.
IP67: sealed when unmated (SWUM™); no dust or moisture can ingress into the inside of the device through an unmated connector accidentially left unprotected.
IPX8 requirements under agreement between user and manufacturer

Connectable conductors for solder area

Section: ≤ 0.75 mm² (AWG 20)

Electrical data (at Tamb 20 °C)

Contact resistance: ≤ 5 mΩ

Rated current: 5 A (Tamb 40 °C)

Rated voltage: 100 V (with pollution degree 1)
32 V (with pollution degree 2)

Rated impulse voltage: 500 V

Poles / Product Inquiry

Designation Poles PU
(pieces)
MDQ
(pieces)
RFQ
(pieces)
Request for quote
(pieces)
0308-2 06-1 6 50 100
0308-2 08-1 8 50 100

Contact information

HRONOVSKY
The request has been sent