Kruhové konektory

Řada 03 | kruhové konektory se závitovým spojem M16 acc. To IEC 61076-2-106, IP40/IP68

Široký sortiment dílů, 3-14 sloupků, s a bez 360° stínění. Kompatibilní párování acc. To IEC 61076-2-106 a IEC 60130-9. Snadná montáž pomocí technologie pájení nebo krimpování. Stupně ochrany IP40 a IP68. Zahrnuje verzi pro 4G/5G mobilní rádiová síť acc. To AISG. SWUM verze zapečetěná i když není spárovaná. Pro signály a zatěžovací proud až do 5 A.

Lumberg: 304 (Řada 03 | kruhové konektory se závitovým spojem M16 acc. To IEC 61076-2-106, IP40/IP68)

Řada 03 kruhové konektor. To AISG specifikace, IP68

Wide range of parts for 4G/5G mobile radio networks, 5, 6 and 8 poles, including parts acc. to AISG specification C485. With 360° shielding and threaded joint M16 acc. to IEC 61076-2-106. Easy assembly with solder or crimp technology. Protection degree IP68. SWUM™ versions even sealed when unmated. For signal and load currents up to 5 A. This is an AISG extract of series 03.

Lumberg: 304 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

304

Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0304-1

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0304-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting

Lumberg: 305 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

305

Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting

0305-1

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting

0305-1 U

Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint, cables and potted solder area, for back side mounting

0305-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for back side mounting

Lumberg: 306 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

306

Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting

0306-1

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting

0306-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for front mounting

Lumberg: 307 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

307

Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting

0307-1

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting

0307-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting

030798-1

Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and ground contact, for printed circuit boards, for back side mounting

030798-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and ground contact, for printed circuit boards, manual soldering, for back side mounting

030799-2

SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting, with hexagonal nut

Lumberg: 308 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

308

Flange chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0308 C 02

Flat gasket for flange chassis plugs and sockets

0308-1

Flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and solder terminals, for front mounting

0308-2

SWUM™ flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting

Lumberg: 314 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

314

Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0314-1

Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0314-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting

Lumberg: 315 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

315

Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting

0315-1

Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting

0315-1 U

Chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint, cables and potted solder area, for back side mounting

0315-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for back side mounting

Lumberg: 316 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

316

Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting

30398

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and ground contact, for printed circuit boards, for rear mounting

KFV ... C

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for front mounting

0316-1

Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting

KGV ... C

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for back side mounting

0316-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for front mounting

SFV ... C

Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for front mounting

Lumberg: 317 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

317

Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting

SGV ... C

Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for back side mounting

0317-1

Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting

0317-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for rear mounting

031798-1

Chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and ground contact, for printed circuit boards, for back side mounting

031798-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and ground contact, for printed circuit boards, manual soldering, for back side mounting

031799-2

SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting, with hexagonal nut

Lumberg: 318 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

318

Flange chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0318-1

Flange chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting

0318-2

SWUM™ flange chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting

Lumberg: 321 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

321

Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals

Lumberg: 322 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

322

Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, 360° shielded

0322 C 16

Flat gasket for sockets 030..., 032..., 036... (spare part)

0322-1

Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°

Lumberg: 331 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

331

Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals

Lumberg: 332 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

332

Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°

Lumberg: 360 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

360

Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°

Lumberg: 362 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

362

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting

Lumberg: 363 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

363

Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for back side mounting

Lumberg: 364 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

364

Crimp contact, contact bush gold-plated

Lumberg: 365 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

365

Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°

Lumberg: 369 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

369

Crimp contact, contact pin gold-plated

Lumberg: 380 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

380

Wrench for plugs and sockets IP68

Lumberg: 381 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

381

Protecting cap, IP68, for sockets, with chain

Lumberg: 382 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

382

Shielding or ground contact ring for chassis plugs and sockets with front mounting

Lumberg: 383 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

383

Protecting cap, IP68, for plugs, with chain

Lumberg: 384 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

384

Hexagonal nut for chassis plugs and sockets (spare part)

Lumberg: 385 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

385

Slit nut for chassis plugs and sockets (spare part)

32200

Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly

0332-1

Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°

33200

Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly

36000

Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly

36297

Flange chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting

36500

Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly

38199

Protecting cap, IP68, for sockets, without chain

38399

Protecting cap, IP68, for plugs, without chain

38799

Protecting cap, IP68, for sockets, without chain

38899

Protecting cap, IP68, for plugs, without chain

Lumberg: KFR (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KFR

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, for printed circuit boards, for front mounting

Lumberg: KFV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KFV

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for front mounting

Lumberg: KGR (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KGR

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, for printed circuit boards, for back side mounting

Lumberg: KGV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KGV

Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for back side mounting

Lumberg: KV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KV

Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm

Lumberg: KV ... C (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KV ... C

Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm

Lumberg: KV ...-8 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

KV ...-8

Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 8 mm

KV ...-8 C

Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 8 mm

Lumberg: SFV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SFV

Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for front mounting

Lumberg: SGR (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SGR

Chassis plug acc. to IEC 61076-2-106, IP 40, with threaded joint, for printed circuit boards, for back side mounting

Lumberg: SGV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SGV

Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for back side mounting

Lumberg: SV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SV

Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm

Lumberg: SV ... C (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SV ... C

Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm

Lumberg: SV ...-8 (Řada 03 kruhové konektor. To AISG specifikace, IP68)

SV ...-8

Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 8 mm

SV ...-8 C

Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 8 mm

Lumberg: WKV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

WKV

Socket acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm

WKV ... C

Socket acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm

Lumberg: WSV (Řada 03 kruhové konektor. To AISG specifikace, IP68)

WSV

Plug acc. to IEC 61076-2-106, IP40, right angle version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm

WSV ... C

Plug acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm

Weitere Produkte auf Anfrage

Cable assemblies with connectors 0315-1 U and 0305-1 U acc. to AISG specification and RAST 2.5 direct connector 3517 (RAST 2.5, insulation displacement technology)

ZMS 20

Wrench for chassis connectors

Řada 01| DIN kruhové konektory

Konektory podle to DIN 45321, kompatibilní párování s IEC 61076-2-106 a IEC 60130-9.-3. Pro signály a zatěžovací proud až do 4 A.

Lumberg: 103 (Řada 01| DIN kruhové konektory)

103

DIN chassis socket, shielded, suitable for locking, metal housing, flange and solder terminals

Lumberg: 105 (Řada 01| DIN kruhové konektory)

105

DIN chassis socket, right angle version, with ground contact, suitable for locking, for printed circuit boards

Lumberg: 107 (Řada 01| DIN kruhové konektory)

107

DIN chassis socket, shielded, with bayonet lock, metal housing, flange and solder terminals

Lumberg: 121 (Řada 01| DIN kruhové konektory)

121

DIN socket, straight version, shielded, with metal housing, bend protection and solder terminals

Lumberg: 122 (Řada 01| DIN kruhové konektory)

122

DIN socket, straight version, shielded, with bayonet lock, metal housing, bend protection and solder terminals

Lumberg: 131 (Řada 01| DIN kruhové konektory)

131

DIN plug, straight version, shielded, with metal housing, bend protection and solder terminals

Lumberg: 132 (Řada 01| DIN kruhové konektory)

132

DIN plug, straight version, shielded, with bayonet lock, metal housing, bend protection and solder terminals

Lumberg: 134 (Řada 01| DIN kruhové konektory)

134

DIN plug, angular version, shielded, with bayonet lock, metal housing, bend protection and solder terminals

Lumberg: 137 (Řada 01| DIN kruhové konektory)

137

DIN plug, straight version, shielded, with locking catch, metal housing, bend protection and solder terminals

10599

DIN chassis socket, right angle version, with ground contact, suitable for locking, for printed circuit boards

Řada 01 | miniaturní kruhové konektory

Miniaturní kruhové konektory (také nazývané Mini DIN). Pro signál a zatěžovací proud až do 1 A.

MJ-372

Miniature socket, straight version, with bend protection and solder terminals

MP-371

Miniature plug, straight version, with bend protection and solder terminals

TM 0508 A

Miniature chassis socket, right angle version, shielded, for printed circuit boards

Řada 16 | napájecí konektory

Napájecí konektory e.g. podle DIN 45323 a JEITA RC- 5320A. Široky sortiment dílů, 1.7-7.0 mm průměr. Pro zatěžovací proud až 3 A na 34 V DC, individuální typy až do 10 A. Řada 02/ rychlouzávěrové kruhové konektory, IP67. Od 02/2021, jsou rychlouzávěrové kruhové konektory dostupné v naší sesterské firmě Lutronic.