Environmental conditions
Temperature range: -40 °C/+85 °C
Materials
Insulating body: PA, V-2 according to UL94
Contact bush: CuZn, silver-plated and flash gold-plated, tin-plated in solder area
Ground contact: CuZn, pre-nickel and tin-plated
Housing: Zn diecast, pre-copper and nickel-plated
Seal: CR (flat), NBR (O-ring)
Mechanical data
Insertion force/contact: ≤ 5.0 N *1
Withdrawal force/contact: ≥ 1.2 N *2
Protection class: IP68/67 *3
1) measured with a polished steel pin, nominal thickness 1.5 mm
2) measured with a polished steel pin, nominal thickness 1.5 mm
3) according to IEC 60529/DIN EN 60529
IP68: sealed in locked position; pair of appropriate connectors in locked
position is sealed against ingress of dust and moisture.
IP67: sealed when unmated (SWUM™); no dust or moisture can ingress into the inside of the device through an unmated connector accidentially left unprotected.
IPX8 requirements under agreement between user and manufacturer
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 5 A (Tamb 40 °C)
Rated voltage: 100 V (with pollution degree 1)
32 V (with pollution degree 2)
Rated impulse voltage: 500 V
